ACCESSORIES: WASH BAY MUST HAVES

Hot Pressure Washer Hose Reel

ALKOTA PIVOTING HOSE REEL

Pivoting Hose Reels are a great way to organize and save on the wear and tear of expensive hoses. The 200 ft. hose reel comes complete with a hose guide and is a great accessory to store up to 200 feet of a 3/8” hose. Hoses are expensive and a hose reel protects your hoses. The reel is rated for up to 5,000 psi and has a max temperature rating of 250°F.

PART NUMBER: REEL-ALKP38200

Pressure Washer Boom

CEILING MOUNTED OVERHEAD BOOM

Ceiling-mounted booms are a great way to conserve hoses and give you years of trouble-free use. In addition, the live-action swivel performs well under pressure and many year’s worth of continuous leak-free heavy-duty use. The boom has a rugged polished stainless steel construction, is self-lubricating, and comes with an insulated high-pressure hose rated up to 4000 psi. Length is: 6’3”, 3/8” inlet & outlet, unit will handle up to 230° Temperatures.

PART NUMBER: J06-DKP66039

Alkota Pressure Washer Hose Trolley

HOSE TROLLEY KIT

Ever tired of tangled up greasy wash bay hoses? Trolley Systems are a fantastic way to manage Hoses; Keep them in a neat and tidy corner of the shop and with the pull of the wand the hose will follow you throughout the bay. Hoses will last longer, stay clean and make your wash bay look professional. The system comes with 10 cable carts, the cable and lag bolts for attaching into the walls. (Hoses Not Included)

PART NUMBER: HTS-990000

Pressure Washer gun hangersSTAINLESS STEEL WALL HOOKS & WAND HOLDERS

Wide Variety Available!

Pressure Washer Foamer

FOAM CANNON

The Foam Cannon is the perfect tool that allows the perfect mixture of air, water, and detergent to give you a thick foamy clinging soap to the surface of what you are cleaning. Foam Cannons work from 1.8 GPM to 6.6 GPM. Detergent goes out of the foamer at a lower pressure and rinses well under high pressure. Foam Cannons adapt to almost any pressure washer on the market.

SEE IT IN ACTION!

Part Number: J06-00350

Pressure Washer Down Stream Chemical InjectorDOWN STREAM INJECTOR

Down Stream Injectors are a great way to apply detergent quickly and under low pressure. The DownStream Injector applies everything after the pump. Injectors are generally sized to the pump that you have and are run by an orifice. You can also get an injector that is adjustable to pull more soap or less soap through the hose, gun, and wand. Down Stream Injectors are also directional, which means there should be an arrow indicating which way the flow goes to make it draw detergents properly. You can also add quick couplers, a longer or shorter 1⁄4” chemical pick-up line, and a check ball to stop the unit from back- feeding out of the hose and filling your chemical source.

Part Number: JA6-00246, 3 to 5 GPM Adjust Injector

Hot Water Pressure Washer Dual LanceDUAL LANCE/VARIABLE PRESSURE
WAND ASSEMBLY

Dual Lance Wands are a great way to change how your pressure washer works for you. A variable pressure wand does exactly what it says. It will cut the pressure down to a garden hose pressure with the twist of the side handle & deliver a lighter flushing spray versus the high-pressure spray. It is also a great adder for the downstream injector & pulls the soap with a venturi action through the hose gun & wand only at low pressure. This allows you to apply any detergents through a d.s.i. without having to change the nozzle. Once you have covered your targeted wash area, simply close the handle back up & go into rinse mode at high pressure.

SEE IT IN ACTION

Part Number: J06-00152

Car Wash mat clampsMAT HOLDER

There’s no better way to clean a floor mat than to have a clamp on the wall so that you can pressure wash the dirt off of your mats. This is a durable spring loaded mat holder that will keep things in place under high pressure.

Part Number: Z01-00171

Truck Wash BrushesTRUCK AND CAR WASH BROOMS

Part Numbers: High/Low Brush J06-00327 – Flat Brush J06—326 – Foaming Brush J06–00360

Truck Wash Brush PoleFIBER GLASS BRUSH POLES

Part Numbers:
J06-00339 4 to 8 ft Telescoping Fiberglass Handle
J06-00340 6ft to 12 ft Telescoping Fiberglass Handle
J06-00341 8ft to 16 ft Telescoping Fiberglass Handle
J06-00363 4ft Straight Fiberglass Handle
J06-00364 5ft Straight Fiberglass Handle
J06-00365 6ft Straight Fiberglass Handle

Pressure Washer Water Broom
WATER BROOM

Water brooms are an accessory that you can add to any pressure washer. The water broom allows you to clean a large area with a spray bar and casters with nozzles. You need a pressure washer that ideally puts out 1000 to 4000 psi and 3 to 4 GPM. The water broom comes with a quarter-inch quick-disconnect plug and three or four fixed spray nozzles depending on the model selected. The water broom is ideal for cleaning concrete, blacktop, decks, patios & pool areas. If you’ve got a hard surface that needs frequent cleaning, this is the ultimate cleaning tool that will help eliminate soils, dirt & debris quickly.

SEE IT IN ACTION!

Part Numbers: SCBE-004 12” / SCBE-005 16”

squeegeeFLOOR SQUEEGEE

The Floor Squeegee is a mandatory item to keeping your wash bay floor clean. We sell one of the best floor squeegees on the market! If you’ve got a wash bay you need one. Comes complete with squeegee head and pole. Assembly includes a 5 ft wooden handle and a 30” foam squeegee head.

Part Number: Z01-SQUEEGEE

Hot Water Pressure Washer Rotary NozzleROTARY SPRAY NOZZLES

Roto nozzles are a great way to increase your cleaning effectiveness. A roto nozzle is a zero-degree nozzle that when put under pressure will start the tip spinning and give you a 25° spray pattern in a circular pattern. The key to this tip is to learn how to use it as well so that you know what kinds of surfaces to use it on. Although this tip will speed up the process it can also do damage if used improperly on the wrong types of surfaces. The roto tip works best to clean concrete or to de-mud something that has excessive dirt or grease.

Always test surfaces before using this tip. Also always start this tip in the downward position to keep from damaging the internal parts of the tip.

Pressure Washer Scale Stop

SCALTROL SYSTEM

The Scaltrol units help to protect your pressure washer investment from scaling up. The unit will reduce the amount of mineral buildup and water staining in a coil assembly. The Scaletrol system comes in two sizes, the 50,000-gallon system and the 100,000-gallon system. They are instru- mental in changing the molecular make-up of the water going through your pressure washer system. SC-50

Part Numbers:  Z14-OSC50 & Z14-OSC100

Wash Bay Curtian

ALKOTA WASH BAY CURTAINS

Learn more about our wash bay curtains here!


What would you add to our list? We have many more industrial pressure washer accessories to deck out your wash bay available! Contact your local Alkota distributor to order or learn more.

Share This Article

You Might Also Like

Request a Quote

Complete the form below to request a quote.